-
-
The current formal test interface can be picked up by the btor2 back-end, but not the `circt-bmc` backend. It would be nice to look into whether or not this conversion is possible and if not, what inf…
-
**Describe the provider you want to add**
BMC Helix ITSM is one of biggest CMDB and ITSM product on the market.
This provider can be used for :
- Topology data
- Create incidents
**Describe…
-
-
According to n6001 bmc user guide, in addition to
`sudo fpgainfo bmc`
the bmc cpld of n6001 supports other methods for telemetry reading:
![Screenshot 2024-10-01 162904](https://github.com/use…
-
Strictly speaking this isn't so much a bug as a performance issue, and one that may only occur in certain circumstances. That being the case I'm not sure how interested you'll be in it, but we thought…
-
sby reports that a wrong assumption has failed when you have a design where you instantiate a module two times and the assertion in the second module fails.
For example, if you have the following t…
-
### Summary
AMI BMC requires an additional OemParameters json when doing MultipartHTTPPushUpdate updates. It looks like #7331 but not exact the same. AMI BMC needs the OemParameters to be a separate …
-
### What is wrong?
for a coupled 3dVar cycling experiment with cold starts for 2021032400 `gdasstage_ic` stages oceans restarts with m_prefix = 20210323.180000, but `gdasfcst_seg0` then looks for res…
-
Linux allow direct RO access to the HW BMC without needing to authenticate (ipmitool use that interface by default) on compatible hardware such as any HPE/DELL or Supermicro server.
Could the expor…