-
I have several airrohr setups running. Some of them use a BME280 and some use a BMP280 (currently only one with BME280, 4 with BMP280, more BME280 are ordered). The ones with BMP280 show temperature a…
-
**Describe the Enhancement**
Add driver code for the [Adafruit BME280](https://www.adafruit.com/product/2652) sensor. The driver code will read temperature/pressure/humidity and upload it to the Dirt…
-
### The problem
I have three [BME280](https://learn.adafruit.com/adafruit-bme280-humidity-barometric-pressure-temperature-sensor-breakout/overview) connected to an [ESP8266 Board](https://www.adaf…
-
tested the bme280 not working with esp8266, esp32 (lolin minikit, s2)
-
When implementing the backend for the bme280 (#285), I didn't see a clear workflow for adding a new plot. It would be great if it automatically plotted new "sensor" measurements based on the data in t…
-
is my sensor broken or is the firmware not measuring correct?
https://github.com/arendst/Tasmota/issues/1051#issuecomment-1288423223
dr-ni updated
1 month ago
-
### The problem
As documented in the BME280 datasheet, the h4/h5 humidity calibration values are 12 bits **signed** integers.
https://github.com/esphome/esphome/blob/56aa58780da5fe73637ed9f583fafb…
-
Pozdrav vec nekoliko dana pokusavam da ozivim klimerka..
dakle..koristim NDU ESP8266 (CP2102 cip) , senzore koji su neophodni i konstantno dobijam isti odgovor a to je
[PMS] Air Quality Sensor (P…
-
### Info
Platform: ESP32 (M5Stack Core2)
ESP-IDF: 5.1.4
Arduino ESP32: 3.0.6
Connected Hardware: BME280 Environment Sensor on GPIO pins 21 and 22 using [https://github.com/adafruit/Adafruit_BME280…
-
Hi,
Thank you for making this, Installers just put in a Lossnay system in my house with a ducted system but they only hooked it up to power. So really it is not doing anything! I really think they d…