-
### Is your feature request related to a problem?
Currently it looks like an open thread border router needs to use 2 ESP32 modules, an H2 to join the OpenThread network and a WiFi module to receive …
-
### Checklist
- [X] Checked the issue tracker for similar issues to ensure this is not a duplicate
- [X] Read the documentation to confirm the issue is not addressed there and your configuration is s…
-
-
Dear Sir,
I am currently using Wi-SUN Border Router (version 2.1.5) on Linux and working on sending periodic diagnostic messages from the border router to a Network Management System (NMS) regardin…
-
After following the directions at [https://github.com/canonical/openthread-border-router-snap](url) on Ubuntu 24.04, attempting to start using the command `sudo snap start openthread-border-router` re…
-
# Summary table of the issues with nRF52840
| Mote | Embedded BR | native BR |
| -------- | -------------- | --------- |
| DK | Fails | Fails |
| Dongle | Wo…
rahav updated
3 months ago
-
https://openthread.io/guides/border_router/
The lowpan API is a great low-level API for interfacing with Thread radios. To be truly useful as a edge processor, the API can be used to create a [Bord…
-
### Feedback
I have picked up an [Espressif ESP32 OpenThread Border Router](https://docs.espressif.com/projects/esp-thread-br/en/latest/dev-guide/build_and_run.html) for testing.
I have two use c…
-
https://github.com/openthread/openthread/actions/runs/10171961935/job/28133812905?pr=10559
PASS 0 FAIL 1 ./tests/scripts/thread-cert/border_router/MATN/MATN_15_ChangeOfPrimaryBBRTriggersRegistratio…
-
I'm following [this tutorial ](https://github.com/contiki-ng/contiki-ng/wiki/Cooja:-simulating-a-border-router). I **started** the Serial Socket, and **started** the simulation. In the same Terminal f…
rahav updated
3 years ago