-
Hello,
have had no isses with label printing on Inventree 0.11.3 using version 0.6.0 of Brother plugin on docker.
After updating to latest stable version of Inventree I had to update Brother plugi…
-
I was not satisfied with the templates provided, so I started to create some new.
Sources:
- [Software Developer's Manual Raster Command Reference QL-600/QL-710/QL-720NW Version 1.02](https://downlo…
-
This was initial meant to be a very inactive fork of brother_ql that is just kept running on modern python / deps. It has seen more activity and interest than I though. Feels wired to have inventree s…
-
Hello. I've noticed that it's when using this plugin with the E550W the label is always cut at the end, it doesn't matter if I disable the option in the settings. I'd like to have the pre-cut done bet…
-
import subprocess
cmd = [
"brother_ql",
"-m",
"QL-820NWB",
"-p",
"usb://0x04f9:0x209d_Љ",
"-b",
"pyusb",
"print",
"-l",
"62",
"background.png"…
-
Support for two-way communication and discovery (via SNMP) would be good to have at some point.
There is an existing PR in the original repo that may be worth looking into: https://github.com/pklaus/…
-
Hi there,
I wanted to add FLe Tape support for PT950NW, but it's bit more complicated that I assumed.
Using DIE_CUT form factor, printer report "wrong tape format" notice when printing.
Raster…
-
I'm having trouble getting a print on this printer to work (and since that is my only printer, I'm having trouble getting anything to work xD). I understand that support for this printer was patched b…
-
May 30 15:12:47 raspberrypi python3[4353]: deprecation warning: brother_ql.devicedependent is deprecated and will be removed in a future release
-
Hi,
sending a larger print job to the QL1110-NWB printer often runs into a timeout of the write command (which is 10s as far as I can tell from the code). The timeout looks to be tied to the amount…