-
**Describe the problem you have/What new integration you would like**
Please add support for BME860 BSEC esp-idf, because of the framework: arduino i cant run BLE there because it takes up a lo…
-
I started tinkering with the bsec python library and the pi3g breakout board (bme688 sensor). Loved the coding part but my readings are really off vs. a control DHT22 which I have running on the same …
-
**Describe the problem you have/What new integration you would like**
is it possible to add support for this sensor via BSEC using ESP-IDF?
well thank you
```
bme680_bsec:
esp32:
board…
-
The Bosch proprietry library for bme680 was updated recently.
Esphome uses the old version ([1.6.1480](https://github.com/boschsensortec/BSEC-Arduino-library/releases/tag/v1.6.1480)). As this version…
-
Hello,
i had compilation problem with BME680 and ESP32S3.
Here is the solution for me:
Library:
1. install DFROBOT BME680 (2.0.0)
2. install`` BSEC (1.8.1492)
Download this: https://commun…
-
Hello,
I just got a BME688 and a ESP32C6 wroom board, so I'm using the latest master on esp-idf to have support for esp32c6. I tried to do something like this in app main:
```
i2c_t i2cinfo;
…
-
The BSEC BME 680 has a new version dated Jan 2020, suggest that the version wrapped up within this code should be updated to allow BSEC bugs/fixes/changes to be corrected
File bme680.c
* @date 23 …
-
I followed all the steps explained in the readme of the repository but I encountered the fatal error
_**BSEC2.4.0.0_Generic_Release_23012023/algo/normal_version/bin/Raspberry/PiThree_ArmV6/bsec_in…
-
During a build I get:
```
CMake Error at /workdir/ncs/nrf/zephyr/cmake/extensions.cmake:372 (add_library):
Cannot find source file:
/workdir/ncs/nrf/ext/BSEC_1.4.8.0_Generic_Release/exampl…
-
Hello Timothy,
I´ve been running your BSEC Conduit for quite a while now and it´s working stable.
However, the IAQ returned by it to home assistant is always 0.0
Have you had this problem as …