-
### Is your feature request related to a problem?
when combing first layer, it sometimes grabs already printed parts and unadheres it from the build plate, I'm using G10 build plate and is properly c…
-
Hi Karl
What's the plastic material you used over the steel belt?
Is it a Neoprene Rubber Sheet?
Can you help me about it?
-
### Description
Just installed a BuildTak magnetic build plate, Since the plate mounts on top of the glass the height of the bed is now slightly taller than the washers. Set the z-offest to…
-
Building ATAK
Building The Prerequisite Dependencies
Step 1: Unpack GDAL
$ tar -xvzf ./depends/gdal-2.4.4-mod.tar.gz
gzip: stdin: not in gzip format
tar: Child return status 1
tar: Error…
-
Hi,
I use your linear advance plugin and it is very useful for setting K constant per settings profile. Is it possible to create a similar plugin to load a G29 Mesh slot (as per marlin Gcode) that …
-
Does Z_HOME_X_POS and Z_HOME_Y_POS only affect homing position when HOME_ORDER_ZXYTZ is used?
The explanation doesn't clarify that:
// If your bed might bend while probing, because your sensor is the…
-
Hi,
I used your code for FSR with some modifications to build a custom copy of marlin 1.1.9 and 2.0, I would like to share them with you, version 1.1.9 FSR + MONO fan, tested and it is work like…
Zezoh updated
3 years ago
-
Hi, Just wondering if anyone can help me.... I'm currently trying to refill my Uprint support chip using the " bvanheu's Stratasys cartridge EEPROM generator " but each time i create a new "refill.bin…
-
Hi,
The S5 heats the nozzle up to the printing temperature of the installed filament for the levelling procedure, this means that if you use a coated print bed (say PEI), the nozzle will met little…
-
**Is your feature request related to a problem? Please describe.**
I would like to be able to create new build plate types, for example, I made a G10 build plate for my Bambu X1C and I'd like to be a…