-
Hello, I have a question for you. Does generate_cam.py's './weight_map.pth' in line 122 refer to the.pt model trained by myself or other models? I can't find any detail information about './weight_map…
xyu11 updated
3 weeks ago
-
Your work is excellent, and I have seen the Grad-CAM visualization results you provided. Could you please share the code for the Grad-CAM visualization? I would be very grateful.
-
请问cam数据是否是通过更改RealityCapture中的calibration.xml文件得到的?可否提供cam数据的格式和生成代码?
-
### Discussed in https://github.com/fuatakgun/eufy_security/discussions/1156
Originally posted by **barney34** June 6, 2024
Would it be possible to add enable/ disable to the Floodlight for t…
-
hello,
I have issue when i ran example image classsification for stm32h743zi2
my error is
![image](https://github.com/STMicroelectronics/stm32ai-modelzoo/assets/166009574/d2f3f118-a3dd-423c-af…
-
First let me start by letting everyone know I am novice with the ESP32-CAM. Purchased 2 from Amazon. Espressif used to install firmware. Been experiencing lock ups. Several times had to reflash …
-
Title. Was wondering when V4 support could be added?
Thanks!
-
cần thêm file pdf
bài ok
-
Straight from jlcpcb, is crankshaft then ready for vr or hall? What mods to swap sensor type on crank? And same for cam, what sensortype, and what mods to swap sensor type?
-
Hello, this setup works for me ->
```
@file Camera_cfg.h
// OV2640 camera module pins (CAMERA_MODEL_ESP32S3_CAM)
#define PWDN_GPIO_NUM -1
#define RESET_GPIO_NUM -1
#define XCLK_GPIO_NUM 15
#…
mozgy updated
20 hours ago