-
Hello,
thank you for the work done, Iam using canhacker + the PCB which you designed. I find out that I have the issue with the connecting with certain Arduino nano types. The "perfect" clones are no…
-
I am using two identical boards. The only difference is the mcp2515 driver on the Arduino.
The sniffer tool receives the data from any source (CAR or the second board), after saving the session or …
-
Hi all,
I use an ESP32 with the following library to simulate the lawicel protocol : https://github.com/autowp/arduino-canhacker
It works well with CANHacker on Windows. I can open/receive/send CAN …
-
Hello
I'm trying to use canhacker with canbus-monitor. I have two boards, an Seeed studio can shield and a MKR GSM with MKR Can shield, and the seeed studio can shield can conect to can hacker withou…
-
Здравствуйте, Дмитрий! Подскажите пожалуйста, пытаюсь подключиться к interior can шине mercedes w220 ардуиной мега с can shield, чтобы посмотреть пакеты. Шина работает на частоте 83.333 кбит/с. Програ…
-
I'm looking for help for Arduino nano and mcp2515, one already canhacker but I can't make it work on savvycan..
-
Hi!
Arter commit e947509667da70d27fe7e48686562b2cbbbcb2cb in rangestatewindow.cpp i can't find signals anymore.
There was an RPM signal in my CanHacker logfile in 0x308 id (256*B + C)
![изоб…
-
I am using windows 11 64 bit. I have a log file in ASC format with a size of about 12mb. When I open the file, the software automatically exits and closes. I tried another way, selecting play back, bu…
-
Hi.
I have own CAN hardware and successful support for serial-to-CAN (SLCAN) interface like VSCOM adapters (for example, monitor CANHacker work fine).
Can I (and how) write plugin for BUSMASTER for…
kv193 updated
7 years ago
-
May I ask how to remove the "can_dlc" from the frame data format. The reason is that the BLDC driver has a different protocal which doesn't have "can_dlc" in the data.