-
**Distribution (run `cat /etc/os-release`):**
```bash
$ cat /etc/os-release
NAME="Pop!_OS"
VERSION="22.04 LTS"
ID=pop
ID_LIKE="ubuntu debian"
PRETTY_NAME="Pop!_OS 22.04 LTS"
VERSION_ID=…
-
I'd like to get the QR code and the descriptions using an API, Since it can be useful for external printing solution, like
[https://github.com/NaitLee/Cat-Printer](https://github.com/NaitLee/Cat-Print…
-
I have:
- [x] searched open and closed issues for duplicates
### This is rather a question than a bug: I am trying to print to a cat thermal printer MX06 similar to [this one](https://hacks…
-
I'm encountering an uncaught exception that prevents me from printing on the Windows "bare bone" version.
Error message displayed on app:
```
Error: API Failure
at Main.handleBluetoothProb…
-
CUPS will not recognise a printer device (Samsung CLP 365W ) symlinked by an UDEV rule at the host and attached to a docker container based on `debian:stable-slim`. A directly referenced device, howev…
-
Hey there!
Me and my class mates are working on this project where want to print our own custom bills with the Phomemo T02 heat printer.
It would mean the world to use if you could support this pr…
-
When I start main.py I got this error and
```
Waiting for connect to /home/pi/printer_data/comms/klippy.sock
Unable to connect socket /home/pi/printer_data/comms/klippy.sock [2,ENOENT]
Unexpe…
-
The added blank line in the comment shows that go/printer is treating this as a doc comment, even though it's not.
It is being tricked by the lack of indentation, which I used as part of the signal fo…
-
Scenario:
Hardware:
RPI3, 4.14.22-v7+, /boot/.firmware_revision: v634741d4199871ab8bd5446a8e63b7e06c1885af (latest by today)
Device: 3D Printer, FTDI Fake Chip: FT232RL, 0403:6001, SerialNumber: …
-
Windows 11 23H2 25915
Python 3.8.5
Unsure if this first part is a part of the issue or my ~~cat~~ panda printer not being supported, but first off it can't find my device automatically, and when s…