-
Start!
Resetting CC1101
CC1101 ID: 0 Ver: 20
Init CC1101 registers
Guru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on CPU1).
Core 1 register dump:
PC : 0x4008ee36 PS …
-
https://www.ktron.in/product/cc1101-433mhz-module/?srsltid=AfmBOoqPjpZKpeDntQoRlhnYGIOiEfXiN5uSWTbj6VfBPbF8D46ocr1kMwk
-
transmit only takes bytes and I'd like to send 25 bits of information about 4 times,
my parameters are the following:
```
[~ (50kHz) ] # define a base frequency
[_ (2100us) ] …
-
When are you planning on launching the Rf update? Would love to help. Lmk.
-
Dear all,
it seems like the TI CC1101 are very hard to get currently.
I ordered one at Amaz*n but got a E07-M1101D.
I googled it and it seems its the Version 2 or the CC1101 (?).
However the pinni…
-
This seems to be the same issue that danucu was having
Neither:
sudo dkms build -m cc1101 -v 1.4.0
nor:
sudo dkms build -m cc1101 -v 1.3.3
work - the make.log that I get for them are:
``…
-
### Current Situation
Hello, thank you first of all for the great work!
I am trying to receive and decode the weather data from the WH65B, unfortunately I am not succeeding in either. I have a cc1…
-
I have found two pages on how to calibrate a CC1101 module.
It here on an approximation method to determine the optimal frequency setting, in relation to the transmitter.
Perhaps this could be adapt…
-
Hello,
I try to receive wireless MBUS Telegrams e.g. from Smoke Detectors, Water Meters and Heat Cost Allocators. I war able to configure the CC1101 in the Examples according to the wMBUS specificati…
-
Hi,
I would like to know if it is possible to get data from Multical 303 using this setup. Could you give me a hint about adaptations to be made for this heat meter?
I am receiving this output o…