-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Used Hardware?
Wemos D1 Mini
### What happened?
I receive incorrect value for QFLAG in new 2.0.0-Pre6. It wo…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Used Hardware?
Wemos D1 Mini
### What happened?
I have a solar inverter (Victor MAX 10.2) with two MPPTs. so…
-
hello. recently I noticed that several times a day the data from my JK BMS + esp32 via UART is lost...searching on the Internet says that this is possible after updating ESPhome itself...
here is my …
-
I have a Triron 4210N and LiTime 12V/100Ah battery. I goot settings from the manufacturer and substituted them in your example script. This worked okay except for an error.
This is not about the err…
-
When expanding my system, I noticed that the ESP restarts quite frequently.
As I don't have any experience with ESP home devices... I can't judge whether this is normal.
![image](https://github.com/…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Used Hardware?
Wemos D1 Mini
### What happened?
I'm using Solar2MQTT with an Effekta 5000 AX M1.
It works f…
-
Greetings. I have an esp32 board that works with jk-bms via modbus with the following firmware:
github://syssi/esphome-jk-bms@main
and also your great project i have successfully connected my POW-…
-
Due to the weight of current power delivery solutions a smaller more lightweight power source is needed. The target is to use one single lightweight Lithium Polymer cell that provides a nominal voltag…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Used Hardware?
Wemos D1 Mini
### What happened?
The Web Console only shows few lines and then stops updating…
-
In systemui -> Lock Screen -> Show Charging information at the bottom >>>
There are some abnormalities like -> It shows 0 V and 0 W
![375636128-fa8bd01f-650e-495f-876c-baf22e66ea46](https://github…