-
Hi,
i am using a Keba P20 which identifies as "KC-P20-EC240130-000".
It seems that the "Total Energy" value is not supported in this library (although the wallbox supports this feature) i think…
-
OCA presents a model for electrical distribution hierarchy in OCPP2.0 "Standardized Components" 3.2.24, and gives an illustrative example at 3.2.41
An example. The incoming fuses are all 120A.…
-
Was just mining in mining dimension and encountered negative energy after I run out. …
-
Currently we use 15 domains - last 4 bits of the command (with one left for expansion)
The first 4 bits are used to distinguish
- CMD_SUBSCRIBE_XXX_CONTEXT
- RESPONSE_SUBSCRIBE_XXX_CONTEXT
- CMD_…
-
in state topic,do we need to add a field "errorCode" in error, as it's unique identifier, use only the "errorType" as a problem attribution, or use the "errorType" as its unique identifier?
-
Following the instructions given in issue #7 with missing DLL. I used `git clone --recursive https://github.com/OpenChargingCloud/VanaheimrElectric` and looks like there is code missing. As I am gett…
-
### Scenario
1. The CSMS asks the Charging Station for the installed charging profiles by sending a
`GetChargingProfilesRequest` message.
2. The Charging Station responds, indicating if it can repo…
drmrd updated
10 months ago
-
Previously we implemented a possibility to stay longer in case of low SOC.
This changes the trip times which we don't want for longer trip sequences as this can lead to unexpected result.
We might a…
-
For both state and event logs, at each time step, we[ log the reports](https://github.com/NREL/hive/blob/2220709fc90df31919bd10f313e5b89be9372d95/nrel/hive/reporting/handler/stateful_handler.py#L122) …
-
We need to define the additional attributes for implementing charging activities described in #9663. Please check and, if necessary, modify them.
**stationFinder/vehicle: input parameters:**
| …