-
Hi, I messaged you on Reddit yesterday about adding support for the CYD. You are correct, there seem to be quite a few variants. My particular one is ESP32-2432S028 (240 x 320 iLi9341V) I've successfu…
-
Hello!
Super nice project!
I really like your GUI and I am sure many will enjoy building one as soon as your repository gets noticed by the radioactivity comunity.
Have you considered upscaling…
-
In VS-Code on a Windows mashine the compiling fails for the ESP32 boards, It works without issue on Linux.
![image](https://github.com/atomic14/esp32-tv/assets/160762514/ea24d1d9-d4d8-4c58-948c-aeb…
-
Hello. I have a cheap gold screen (cyd) and wonder how to install this tool on a cheap gold screen (cyd). I tried installing it but it doesn't show up, it just flashes a green light.If you have a way …
-
How I can make "ESP32-Marauder-Cheap-Yellow-Display"
-
Hopefully support for the ESP32-2432S028R can be added to the scripts to build the images.
This device is ESP32, has a 2.4" display, touch screen and a SDcard reader. This hardware is practically a r…
-
so iam using a CYD and i have finally successfully uploaded myb sketch but for some reason the display is not working at all.
in the arduino IDE in the serial monitor it appears that everything is …
-
Hello, I found out that some SD-cards could not get mounted-are not recognized.
Device Cheap-Yellow-Display.
I have 2 manufact. Sandisk 16 GB , Intenso 4 GB, the Sanisk card works with the playe…
-
Hi, I like your projects a lot and I adapted this example for another device, giving you full attribution.
Would it be ok for you if the example is included in this repository, where the owner ask fo…
-
Hello
I fiddle with my Cheap yellow Display but I can't assign SPIClass(VSPI);
The begin() function can also specify communication on a different SPI port.
`ts.begin(SPI1); // use SPI1 rather th…