-
I followed all instructions but my chlorinator is not discovered. Any tips?
-
Is it possible to add control for the chlorinator?
There's automated chlorine level sensors out there, being able to control the chlorinator could make it possible to automate the settings using H…
-
Hi there,
I have this exact combination of pump and chlorinator. Can you help confirm how this is wired up....there is a Astralpools VX Chlorinator interface board that you have designed. Does this…
-
So just thinking about the PPM levels for salt. I had a water test done by the pool shop today and my salt level is really high, about 8000 ppm.
Previously Aquapure was showing readings of 4000, e…
-
Two of the sensors randomly stopped showing / being available recently, the spa chlorinator salt level and spa chlorinator setting. Additionally, reviewing the GitHub it seems I should be able to con…
-
I’m using a simple generic thermostat to control a pool chlorinator. Is there any way to change the wording of a status using this card? For example, instead of “heating” I’d like it to say “dosing”.
…
-
In 7.86 when setting my chlorinator to run for 5hrs after pressing apply the timer at the top actually goes to 5mins. If I do 5hrs 15mins it works fine
-
### nodejs-poolController Version/commit
8.0.0 a80df29
### nodejs-poolController-dashPanel Version/commit
8.0.0 cb05840
### relayEquipmentManager Version/commit
N/A
### Node Version
v19.8.1
##…
-
Issue to troubleshoot missing Air Temp sensor entity in HA.
I have a pool/spa combo with shared equipment, and both the pool and spa temp sensors come in with no issue. For some reason however, the…
-
### The problem
Once in a while, HA crashes since I have enabled this integration.
Looking at the logs (after recovery, which is abnormally long), I can see those lines, which might be helpful to in…