-
I don't know if you are still interested in this, but my Ramses_RF script advised that I reported the following message
```
11:03:56.594 || 22:006128 | | I | device_battery | ||…
-
I am using the branch with numeric override ability, but not sure how that is supposed to work. It seems only messages from thermostat can be overridden. I want to override the answer from the boiler …
-
In the Evohome control panel, you can see the heat demand per zones. Is it possible to get this data by the API and view this information in the Domoticz web interface?
-
The real RF15 display (Orcon RF15 display) has readout for error codes.
Can you implement these? I have the modbus addressed and error messages for the error codes if this helps.
![foutcode](ht…
-
```
Geen kleine toevoeging, maar misschien zelfs een apart sub-project:
ondersteuning van OpenTherm.
Veel CV ketels gebruiken dit protocol voor communicatie met de thermostaat.
Als we OpenTherm van…
-
Wemos D1 reboots about every 10 seconds
Reboot log
2023-02-02 19:48:17 - reboot cause: Exception (2) - Access to invalid address (28)
ESP register contents: epc1=0x40241688, epc2=0x00000000, epc3…
-
Using pimatic 0.9, adding a device with defaults raises the following exception:
```
Knex:warning - calling knex without a tableName is deprecated. Use knex.queryBuilder() instead.
11:57:34.125 [pima…
-
Don't know if this can be properly named an issue and if this the proper way of contacting you, but I'll do it anyway. Thanks for the great work you guys all did on **ramses_rf**
I've been analyzin…
-
How do you identify which found device is which in practice?
While I understand the point of the `known_list` etc, it seems prudent to label the ID with at least a comment of which sensor is which …
reedy updated
7 months ago
-
[EDIT] This issue appears to have been caused by faulty hardware.
**Describe the bug**
Integration spikes the CPU just after it tries to start and the only way out is by hard resetting HASSOS. HA …