-
Hi :-)
Could this faboulous project be used to output CI-V to steer my new JUMA amplifier from the IC-705?
It has a standard 3.5mm jack used for CI-V.
Thanks
73
Frank
-
Sorry for bringing this up as an issue, but I do not seem to be able to connect to an IC-705 over WiFi using rigcontrol. Using the following command line:
`
rigctl -m 3085 -c 0xA4 -r 192.168.1.254:5…
-
Version: rigctld Hamlib 4.6~git 2024-09-29
OS: Windows 10 x64
Radio: Icom IC-707 via XGGComms USB-Digimode-4 on COM4
### Very brief tl;dr:
On the Icom IC-707, Hamlib cannot start a scan in VF…
-
**Project Name and Description**:
The [SIMD Everywhere (`simde`) project](https://github.com/simd-everywhere/simde#simd-everywhere) provides implementations of 2,930 x86 intrinsics ([SSE, SSE2, SSE4…
-
Version: rigctld Hamlib 4.6~git 2024-09-29
OS: Windows 10 x64
Radio Icom IC-707 via XGGComms USB-Digimode-4 on COM4.
### Very brief tl;dr:
There seem to be a couple of mistakes in the IC-707 r…
-
Diskusia k otázkam:
1. aké a či vôbec uchovávať log nejakých udalostí alebo polôh
2. v akom formáte budú zadávané súradnice v konfiguračných súboroch
3. komunikácia radio frequency
-
День добрый Геннадий!
Не планировали создать библиотеку для этого интерфейса.
Это позволило бы управлять устройством согласования к примеру.
Или усилителем мощности.
В принципе достаточно только о…
-
Recently we started to get test failures on CI for a test case that had no problems in months. It sounds like some recent change introduced a significant overhead leading to long runtimes. Here is one…
-
Pokud chci zobrazit harmonogram (jak v administraci programů, tak výběr na webu), tak po "dotočení" kolečka se zobrazí prázdné řádky (v případě Seznamu) nebo volná tabulka (Na výšku či šířku) v případ…
-
I have seen the status of memcached in the RISC-V software ecosystem sheet as "In-progress" for RISC-V. I am assuming that this is not yet fully supported for RISC-V. Also the CI for Memcached is runn…