-
Installing and running (instructions compiled from various online sources):
```shell
nix-shell -p wine winetricks
WINEARCH=win32 WINEPREFIX=/home/sb/.wine-circuitmaker winetricks vd=1920x1080 -q gd…
-
To use your EVSE code on the STM32f0x I would need a GPIO pin mapping or a schematic. Can you please add this to your repo?
-
Board should use MAX5134AGUE+
-
First of all, thank you for this program. It works extremely well for backing up the Udemy courses I've purchased.
I ran into an issue with one of my courses that has very long chapter title and le…
-
First of all: Great work! I really like the design and workflow of Horizon EDA. Working with your neat piece of software is great fun!
While extending the pool, the question "How to report issues i…
jue89 updated
4 years ago
-
It seems as if all of the elements of the circuit (using the alternate motor driver, DRV8835) can run on 3V, and the button-cell has a significantly-higher mAh rating. Is there anything preventing the…
-
I2C and UART should be connected to microhal connector, Timepulse should go to GPIO
-
Design small PCB with microhal connector and LSM9DS1, I2C interface should be used. It may be important to provide correct power up sequence (datasheat 2.2.1 Recommended power-up sequence)
-
I'm afraid I don't have Altium, so can't really see the design at all. Would you mind also adding PDF output of them?
-
Option -d or --id won't work with serial when the serial number is not one of a known mk2.
I use my own serial (as it is open hardware I made my own boards) so I cannot use blink1-tool. I will have t…
atsju updated
7 years ago