-
Hi Kris,
I was wondering if you ever experienced problems with the board stopping responding to i2c messages after some time of operating?
Occasionally after some time has passed, the i2c function…
-
**Describe the problem you have/What new integration you would like**
CJMCU-4541 (MICS-4514) integration.
**Please describe your use case for this integration and alternatives you've tried:**
…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Describe your problem
I CAN RUN SCRIPS BUT THEY STOP MIDWAY
### Steps to reproduce
i got a CJMCU 3212 the on…
-
How does it feel that this CJMCU-8118 measurement data is not accurate! It's code! It's still a module problem
-
Hello Leo
I am trying to use your library with the CJMCI-22 board (GP 22) for a smart flow meter
I receive always this message from TDCtalk :
attached pinChangeISR_debug
\/Temp sensor: no addr…
-
大佬，你好，我用了你的IP和顶层loopback，硬件上使用以FT232h为核心的CJMCU-232H模块,和xilinx的spartan-6 开发板（黑金AX309），用usb_loopback_simple.py发送16字节时收发数据是一致的，但是在usb_loopback_mass.py里连续收发数据会出现不一致的情况，（txdata and rxdata mismatch）, 想问一下会…
-
Hi to every one
I am using CJMCU-3212 Beetle Virtual Keyboard Bad usb ATMEGA32U4 WIFI ESP-8266 ESP8266 ESP-12E TF Micro SD Card Development Board Module but when i Upload sketch atmega32u4_code i fo…
-
Hi to every one
I am using CJMCU-3212 Beetle Virtual Keyboard Bad usb ATMEGA32U4 WIFI ESP-8266 ESP8266 ESP-12E TF Micro SD Card Development Board Module but when i Upload sketch atmega32u4_code i fo…
-
The [generic CJMCU-8223 board](https://www.aliexpress.com/i/2255800707216773.html) uses an nRF51822, the same as the Adafruit blefriend32 boards. The Nordic sniffer firmware used on the pre-flashed Ad…
-
For me, being abroad, the Sparkfun board is not available but I got the CJMCU-811 board with the CCS811. I tried to get it to work but failed so far. I'm a noob and not sure what I am doing wrong. I t…