-
Upon running `sudo ./install.sh`
this is the output :
```
> Copying source to /usr/src/cm4io-fan-0.2.0...Done
> Running DKMS install...
> Error! The /var/lib/dkms/cm4io-fan/0.2.0/6.1.21-v8+…
-
Hi,
i couldnt figure out yet how to get it working on ubuntu 20.04
the latest kernel there is 5.4.0-1042-raspi
the module compiles fine but it requires changing the regex in dkms.conf
the bi…
-
See this https://github.com/ondrejbudai/fedora-bootc-raspi/blob/cbff66a8bdb82b6276814765ffdb82c4ec4efa9c/bootupctl-shim#L7
Basically today the bootloader update payload is often part of the base im…
-
Could you add support for the Banana Pi CM4?
See: https://wiki.banana-pi.org/Banana_Pi_BPI-CM4 (basically a replacement of the Raspberry Pi CM4)
Since this board is missing from your list (`Bana…
-
Hi, after connect CM4-fan-3007 to FAN pins (all 4) I can't force it to spin using I2C and cm4io-fan.
Before instaling cm4io-fan when I run `i2cdetect -y 10` I get correct value on 2f and I can change…
-
On the schematics the HDMI interface looks like the CM3+ HDMI interface. The CM4 has a simplified interface, see the CM4IO board. You no longer need the ESD device as that is built into the CM4 also y…
dp111 updated
3 years ago
-
If we want to add any module to kernel we need latest headers and source.
For example for dkms and cm4io-fan ... I can't build module
Any advices are welcome
-
Hi,
I have a problem running the command line below on the CM4 Maker Board:
`sudo cm4io_rtcctl.py show date`
Here is the error:
![Screenshot 2023-11-03 121025](https://github.com/bablokb/cm4io…
-
Hi, may be you can help:
I've installed your cm4io-fan - basically it works, but somehow the fan speed seems to be wrong.
In my /boot/config.txt I have the following line:
dtoverlay=cm4io-fan,min…
-
#### Type of Raspberry Pi
CM4 + Original cm4io Board
#### Linux Kernel version
Linux NasPi 6.1.36-v8+ #1659 SMP PREEMPT Fri Jun 30 13:19:42 BST 2023 aarch64 GNU/Linux
Test:
`python3 examples/…