-
There is a libgpiod2 package in buildroot, with the option --disable-bindings-python set.
I modified it to pass the --enable-bindings-python, but it doesn't work.
At the setup.py stage, the host com…
-
The bcm2711-rpi-cm4s.dtb file is missing from the scriptexecute firmware. Without it, the scriptexecute firmware fails to boot on the CM4S. With it, the scriptexecute firmware boots, but does not st…
-
I am creating CM4S altium library, I would like to know anyone used or planning to use it ?
-
### Describe the bug
When playing a sine or multitone signal (48 kHz sampling rate) into an AudioPrecision audio analyser.
Sound is played but Performance is horrible (15 % THD+N)
Sampling frequenc…
-
**Is your feature request related to a problem? Please describe.**
*As a* customer who has a number of Raspberry Pi devices on their network (not all necessarily CM4s in a TP2 board)
*I would like…
-
I am trying to use this on a Turing Pi 2 board with CM4s and when I connect to a CM4 over serial with `microcom -s 115200 /dev/ttyS2` the Setup UI slowly bugs out as I navigate through the menus until…
-
### Describe the bug
With current rpi-5.19.y there is no serial console on a CM4 unless commandline option `8250.nr_uarts=1` is added explicitly. This seems to have been introduced by commit b9e62329…
-
### Describe the bug
With the `vc4-fkms-v3d` overlay enabled, there is a error message regarding the EDID detection of the (disabled) hdmi1 port:
```
[ 11.275757] vc4-drm gpu: bound fe600000.…
-
Hello! I had the exact same idea for a cluster development :) I'm super noob in electronic despite my engineering degree but I will help as much as I could. no idea how to contact on github so I'm mak…
-
Raspberry Pi requires a bunch of files to be available in the root of the ESP partition (traditionally mounted as `/boot/efi` on Fedora) in order to boot. In the case of Fedora, this means the firmwar…