-
### The problem
Any way to bring the abode smoke listener, as well as the First Alert Smoke/CO detectors, into HA?
### What version of Home Assistant Core has the issue?
core-2023.5.2
### What was…
-
Hallo,
ich habe den Adapter aufgesetzt und mit einer iot-Instanz verbunden, jedoch bekomme ich nur für den "info"-Bereich werte gesetzt. Im Log sieht man denke ich ganz gut, dass stateChange nur fü…
-
I happily used your project, thank you for the hard work.
However, I upgraded the sensors config according to the latest Home Assistant principles (2024.1).
The availability of the sensors is also a…
-
Hello, I recently bought the Zipato CO sensor under the impression it's a z-wave device, but it turned out to be a [Zigbee version](https://www.zipato.com/product/carbon-monoxide-sensor-zigbee). My ba…
-
Peter Strobl (EC-JRC, LSI-VC Co-Lead) raised a concern regarding the categorisation of 'Optical' versus 'Radar' at the same level. He suggested that if the criteria is wavelength range it would be 'Op…
-
The LMP91000's GNDA is not directly connected to the system digital GND or to the ground of the ADC.
-
Using Gnome + Wayland
Wacom Driver version 2.0.0
I tried with 2 kernels: 6.5.7 and LTS 6.1.58.
I can see: **wacom_idleprox_timeout: tool appears to be hung in-prox. forcing it out.** like in #3…
-
Instalace pomocí HACS, HA core-2021.6.5, konfigurace přesně dle návodu
# Example configuration.yaml entry for showing current HDO state and HTML for rendering a time schedule
binary_sensor:
pla…
-
### Platform
NRF52, ESP32
### Description
Hi, Just wondering what the best approach might be to add Anemometer support for environmental data on Meshtastic. The use case of a remote weather station…
-
Hi, Do you have any example for reading CO ppm value in Arduino [ ULPExample_1sensor.ino](https://github.com/SPEC-Sensors/ULPSM/blob/master/examples/ULPExample_1sensor/ULPExample_1sensor.ino) requires…