-
This issue was tested on IPv6, but it (probably) applies to IPv4 as well.
When sending a request to an IPv6 multicast address, IMO there are two aspects that need to be updated:
1. Every response to t…
-
I am experimenting with both unicast and multicast and have trouble with the no_response option.
I have set the option (both on client transmission taks and on server resource) to 26 to make sure no …
-
## Environment
- **Build System:** [CMake]
- **Operating System:** [esp32 / RTOS]
- **Operating System Version:** [ IDF 4.4.6 ]
- **Hosted Environment:** [ESP-IDF]
#…
-
I was looking for a way to convert [this](https://github.com/efento/NB-IoT-sensors-integration/blob/main/NB-IoT-sensors-integration-2-way-communication.py#L58) python script in NodeJS. I never used Co…
-
Hi
why do I run server.py with python3 and then run clientGet.py to get these?
2018-12-15 10:06:40+0800 [-] Message b'D\x01\x07\xf6\x00\x00\xc5\xfa`Ttest' sent successfully
2018-12-15 10:06:40+08…
-
In prep for creating a PR, I was following the advice in https://github.com/plgd-dev/go-coap#contributing.
The docker build command seems to have been successful. I did see these errors, but they a…
-
Is it possible for a server using this library to receive both unicast and multicast messages on the same UDP port?
-
After sending a number (3 to 4) of messages to an **unreachable** light to the Ikea Hub,
I notice that subsequent requests to change the colors of **reachable** lights don't seem to get through:
ho…
-
Hi, this is more a query than an actual issue,
I have a use-case where I send a lot of non-confirmable POST&PUT to my aiocoap server. As described in 5.8.2 and .3 of the standard, the aiocoap server …
-
This needs to be
* understood w/rt its implications for PlumbingRequest,
* fixed, and
* tested.