-
I tried the program with different boilers and it was a success! There was not a single problem...
But the program does not work with one boiler. More precisely, the program works, but the boiler doe…
-
I am receiving data when sniffing, but I don't get any new data when, for example, I lower the windows or control other functions in the car.
The RPM example worked, so I assume the baud rates are …
-
I am using two identical boards. The only difference is the mcp2515 driver on the Arduino.
The sniffer tool receives the data from any source (CAR or the second board), after saving the session or …
-
maybe it should be 2
-
How about having a layer for showing all terminus' and Interchanges. We could also use this for better routing. Ex:- Though am in adyar, i would like to go to besant nagar / thiruvanmiyur and then tak…
-
When I connect to my M2 via USB and launch SavvyCAN, I see a GVRET device in my connection window. It has 3 buses. After a while the speeds are automatically set to 500k,500k and 33.3k respectively. F…
-
The VW e-Golf seems to have some similarities to the VW e-Up.
Chris van der Meijden (@devmarxx) began working on an adaptation, but lost access to a test car so cannot continue on this. He sent me …
-
## Customer Need
*On behalf of Amtrak...*
*As a customer, I'd like to know (and potentially select a route by) if I can expect the bus route I've chosen to provide a comfortable amount of space …
-
### Problem description
I'm re-reporting https://github.com/zigpy/zha-device-handlers/issues/2985 as the information in that request is quite muddled, and I wanted to provide it in more legible for…
-
I use arch linux, and I'm trying to make it so that when the UPS switches to battery power mode, a signal is sent to the computer for a normal shutdown.
```
[jorj@jorj-systemproductname ~]$ lsusb
…