-
I would like to see if you can implement Jiffydos in the C64 mode of the Mega65. Current hardware like Commodore 1541, 1571, 1581 and others like Rear Admiral Thunderdrive and uIEC/SD adapters that us…
-
This is probably a bit of a stretch goal *laughs*, but if we could get 2031 drive support (which is very, very close to that of the 1541, even using the same disk format!), that would make data transf…
-
I noticed that when a .D71 image is inserted into 1571 and then drive type is changed to 1541, the .D71 image remains inserted. A real physical 1541 drive can access the first side of 1571 double side…
-
Hello Dirk, today I found new versions of DraCopy 1.3doj.
After exiting the program, I get the error: "?syntax error in 311”.
Then I have to restart my computer to continue using it.
DC641.3doj,…
-
How to start?
pip?
git clone then ...
And how to do the first like
- load a sample project
- load a sample disk
- run the first python program and back (not just screen dump)
- load an…
-
Hi everyone, hoping for a bit of assistance,
I have set up a SD card on a Raspberry Pi 2 (using the PI2 kernel.img) according to the instructions. When powering up, the black/blue menu appears on t…
-
It would be great to have (e|si)mulation of IDE64 device, and SD2IEC. As both are open source, this could be feasible.
-
Platform MEGA65, ROM 920377 and newer:
When I use my SD2IEC device on my MEGA65's IEC port in Mega65 mode, it works unreliably.
At first glance it works. But loading is very slow and when I load l…
-
Although I can load FB64 from Jiffydos (I use it as rom on EF3), if I try to load with Epyx Fastload or Action replay 6 Fastload they hang on "SERCHING FOR FB64".
Can anyone test and confirm this?
…
-
I am having this issue with the searching for $. It gets stuck at this and I cant stop it unless I turn off the c64. I know in your instructions to use LOAD"*",8 instead of LOAD"$",8 but it would come…