-
When the observing conditions are poor, the N images of a lens system will be blended together, leading to significant covariance between the magnitude measurements. This needs to be taken into accoun…
-
I'm trying to test a few circuits that can separate the real and imaginary parts of the cross-correlation of two noise sources. This can be accomplished with a 180degree hybrid (real part) and a 90deg…
mbe9a updated
3 months ago
-
use a GP to generate it
-
I am finding that the noise in different STIPS-produced images is correlated. That is, if I run two different bands with 2 different SEED values, the noise peaks in each will be in the same pixels. …
benw1 updated
2 years ago
-
* allow for correlated noise following https://arxiv.org/abs/2006.14044
-
Its possible that im dumb, but I am just wondering why in the final fit the truth dict is used for constructing the model
`kwargs = dict(**truth)
kwargs["bounds"] = dict(location=(-2, 2))
mean_mo…
-
Hi,
Following the link "All the code used in this tutorial is available here."
([https://github.com/dfm/george/blob/master/docs/_code/model.py](url) leads to a 404 error page.
Regards
-
So during my attempts to run `predict` on very large "testing set" grids, I ran into the classic memory overflow issues that `predict_in_batches` tries to protect against. However, I don't think funct…
-
Hello! Does GMTSAR's SBAS time series processing perform terrain correction? My settlement rate result is shown in the following figure, which is significantly affected by DEM. During the interference…
-
### Suggested feature
Issue:
The current research extends its focus on genuinely quantum sources of time-correlated or non-Markovian noise arising from coherent interactions with the environ…