-
### Software
Your firmware version: D2.1.96 (6 Mar 2021)
Your bootloader version: 5.0.4
### Hardware
* UI Board: mcHF 0.6.3
* RF Board: mcHF 0.6.3
### Describe the issue:
Loving the rad…
-
Would it be possible to add code to make a _functional_ input for straight keys (as opposed to a simple pass-through)?
The idea is that the key input would not only be de-bounced for straight key…
-
CWirc lets users communicate via IRC using Morse Code. Matrix should have a counterpart.
If someone joined [#freenode_#cw:matrix.org](https://matrix.to/#/ #freenode_#cw:matrix.org) , they should b…
-
Hello,
I'm currently try to get the Keyer firmware to work.
Arduino IDE 2.3.2, and a Arduino Pro Micro board attached to a Mac M1 (latest OS).
I connected a 3D printed CW key to the pins 2 an…
-
![k3ng keyer experimental cw decoder circuit](https://cloud.githubusercontent.com/assets/3332720/7215440/e17aee5c-e5a5-11e4-8714-51f55a81b324.png)
-
Not so much an issue as a proposal. Could the standard also include a pinout for a CW keyer rather than a mic? Folks might like, (I suspect very much), to bring their own keyer as well.
I've built …
-
Acync data can have the following uses:
* Keyer data from PC to HL2
* Amplitude/Frequency/Phase information for native HL2 modulation of WSPR/FT8 or CW ramps
* Enable simple programs to have acce…
-
Hello!
I noticed the Morserino-32 in "CW Keyer" mode enumerates as a com port device and outputs the same decoded string (sent by the user) as shown on the display. Would it be possible to make it …
-
Hi !
I have error with compillation keyer code for STM32 Blue Pill board:
-----------------------------------------------
C:\Users\r5au\Documents\Arduino\k3ng_cw_keyer-master\k3ng_keyer\k3ng_ke…
-