-
Need PCB design for shield connection CY7C68013A Development board EZ-USB FX2LP and TSOP48 DIP48 SA247 SXA-TSOP48/D48 IC Test Converter Socket Chip Adapter
CY7C68013A Development board [here ](ht…
-
CY7C68013A-56PVXC
https://www.infineon.com/cms/en/product/universal-serial-bus-usb-power-delivery-controller/peripheral-controllers/ez-usb-fx2lp/cy7c68013a-56pvxc
-
For developing FX2 firmware, you can get most of the way using [the cheap "dev boards"](http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313.TR3.TRC0.A0.H0.Xcypress+fx2.TRS0&_nkw=cypre…
-
Hi,
I have an LCSOFT board from here:
https://es.aliexpress.com/store/product/Free-ship-IEZ-USB-FX2LP-CY7C68013A-USB-core-board-development-board-USB-logic-analyzer-I2C-serial/808897_976713163.h…
-
First, thank you for this project, this required a lot of research and work.
I see Infineon supports MacOS with the CY7C68013A MCU. You have done the heavy lifting on the FPGA, so it is a bitstream l…
-
-
In GitLab by @rtek1000 on Jan 28, 2022, 12:36
Hello,
I would like to know if this programmer accepts that the pins are controlled through commands and if some kind of script could be used to activat…
-
As Wayne reported [here](https://lists.launchpad.net/kicad-lib-committers/msg00547.html), there are some invalid footprint associations in Amplifier_Audio.lib which need to be fixed. They're old refe…
-
Hantek 6022BE
All two probes connected to calibration 1 KHz 2 Vpp output.
Software trigger mode.
Digital phosphor is on.
Nonexistent raising and failing edges is periodically displayed.
![raising…
-
Just wanted to thanks you for your code !
I had an Attiny85 and FS1000A on the bench so decided to give it a try instead of buying new hardware... (I know other github on tesla door opener mention…