-
Since few weeks I observe frequent checksum errors when querying my DALY BMSs. Here is one example.
What confuses me is that the expected checksum is always the same, but it always gets a different o…
-
Hello,
I have Daly BMS 16S 48V 200A connected to Pi device. I have also Growatt Inverter connected to the same pi device. I am able to read info from both devices and my problem is that i can not fin…
-
im getting an error. please help
```
Paste log output between BEGIN and END:
BEGIN
s6-rc: info: service s6rc-oneshot-runner: starting
s6-rc: info: service s6rc-oneshot-runner successfully sta…
-
Hi,
i'm trying to send data to home assistant but when i run the script nothing are send to the mqtt broker, what i wrong?
This is the command i run:
```
root@dockers-deb12:~/daly/python-daly-bm…
-
### The problem
The nodemcu does not receive any info from the bms. UART connection is definitely correct. I have all the files such communication protocol and bms wiring diagram if someone would l…
-
hi brad,
thanks for the software. i have installed your dbus-btserial driver on a raspi4 running venues os. unfortunately the software does not find my daly bms. here is the output.
root@raspberr…
-
Hi! I love what you’ve got going here. I recently built a battery pack with three Daly BMS and I am attempting to establish EXTBMS comms with SMA.
I saw your post on a forum and I have some rPi 4b’…
-
**Describe the problem you have/What new integration you would like**
I use the Daly BMS with esphome. This works great.
Is it possible to add the possibility to read out the Parameter cycles…
-
if the config looks like this:
```
[JKBMS_UNTEN]
type=jkbms
protocol=jk04
port=C8:47:8C:E5:CC:9F
command=getCellData
outputs=screen
[JKBMS_BOX1_UNTEN]
type=jkbms
protocol=jkv11
port=C8…
-
Hello
Impossible to compile this code:
Wemos D1 ESP32
Arduino IDE
Thanks for the answer
Christophe
I_MQTTstuff:12:16: error: variable or field 'WiFiEvent' declared void
void WiFiEve…