-
### Steps for reproducing the issue
1. Connect three daisy-chained monitors via USB Video
2. Activate `ddcutil` in wluma with name `HP` and capturer `Wlroots`
3. start wluma
4. Logs show: `ERROR w…
-
ddcutil 2.1.4-1 often fails to detect my monitor's LG ULTRAGEAR+ and PHL 243V5, i have uploaded the output of ddcutil interrogate.
[ddcutil_interrogate.log](https://github.com/user-attachments/files…
-
create lock file, perform command, wait for defined length of time, remove lock file. return error if lock file already exists
-
Thank you for this exceptional tool!!
### CONFIGURATION
1. Windows 11 Pro 23H2 22631.4037
2. Twinkle Tray v1.16.0-beta7 (6d73e88)
3. Monitors: 2x Dell U2720Q; 1x Dell S2721QS; 1x OMEN 27k (HPN…
-
Hi, so I'm trying to control my external display's brightness with ddcutil, but the issue is, it says `Display not found`, running `sudo ddcutil detect` shows `DDC communication failed. (getvcp of fea…
-
Using `ddccontrol` could allow users to easily control the brightness of their external monitors.
ref: https://github.com/ddccontrol/ddccontrol
-
![image](https://github.com/xanderfrangos/twinkle-tray/assets/46023154/d2d9f768-5d41-4e08-bf23-292c8381eddf)
-
I am relatively new to GitHub and am seeking guidance regarding the acquisition of default DDC/CI codes for display's monitors, specifically for model G27q-20. My goal is to fully utilize Twinkle by a…
-
After setting 'Turn off displays action' to **Hardware* signal DDC/CI only':**
I can power off my monitor using a hotkey,
or the twinkle tray icon 'Turn off displays' - bottom right of slide out m…
-
The Linux tools `dcci-tool` (https://github.com/bhuvanchandra/ddcci.git) and `ddccontrol` (https://github.com/ddccontrol/ddccontrol) both have the ability to query a monitor about its capabilities by …