-
### Rules
- [X] I made myself familiar with the Readme, FAQ and Troubleshooting.
- [X] I understand that, if insufficient information or no app logs will be provided, my issue will be closed without …
-
I chose EPS32-PICO-V3-02 chip and board for testing. But there is no way to specify the correct board in PlatformIO. I found the Denky D4 (PICO-V3-02) to be close to my choice, but the info only says …
-
### The problem
Using teleinfo floods the log with crc errors, even though data seems to be fine and my entities are correctly updated in HA. I haven't found a way to debug the offending tag as eve…
-
Bonjour, j'essaie de monter le petit circuit électronique chez moi, malheureusement je n'ai pas de données qui remontent dans home assistant, et je ne vois rien dans les logs en debug, pourtant je ne …
-
### The problem
The latest update broke ESPHome on the Denky D4, typically used for Linky Teleinfo in France. We can no longer select GPIO8 for UART/RX, it was working fine in 2024.5.x.
### Which ve…
-
Bonjour,
J'utilise depuis une semaine sur un Denky votre firmware qui est venu remplacer avantageusement (!) l'original teleinfo.
Tout fonctionne correctement mais dans le dashboard Energie de Hom…
-
Hi @hallard
My denky D4 board v1.3a bought in November 2023 is not powering up anymore. (no led lit, not detected with computer)
Do you have any tips to troubleshoot ? known issue ?
thanks
-
Dear Charles,
sorry if noob question (smart meters are implemented differently in Germany):
* is the Denky D4 compatible with French Linky boxes?
* if so, how would the be connected to a Linky …
-
Hi,
I've got a question conerning the pinout: if I undestrand correctly, the TELEINFO info pin is mapped to SD1/GPIO8 on ESP32 ?
If so, is that correct as the ESP32 doc states the SD1 is reserved …
-
Hello,
installed this weekend denky D4 and seems to work well with homeassistant.
Howevoer, in HA i got some sensors always to Zero :
![linky 2024-01-22 074704](https://github.com/hallard/De…