-
with the latest firmware `2.4.16` for the Ikea E2001/E2002 the are `brightness_stop_up` /and`brightness_stop_down` actions are nor more available
this also documented here:
https://www.zigbee2mqtt…
-
### What happened?
I am updating a group of lights from OpenHAB via MQTT. OpenHAB behaves correctly and sends the expected payload. Zigbee2MQTT (Z2M) receives and processes this payload, as evidenced…
-
In the Homie 5 draft, there is "rgb", "hsv", and "xyz" for the color type.
- in "rgb" the brightness setting is included in the information; rgb(50,50,50) is the same color as rgb(100,100,100), but…
-
### What happened?
When doing a top or bottom button press the commands issued toggle between "brightness_move_up" and "brightness_stop" (for the top button) and "brightness_move_down" and "brightnes…
-
To tackle the task of creating a smart home automation system in Java, we'll break down the requirements step by step and provide the necessary code snippets for each part. Let's start with the class …
-
Feature Request:
As part of enhancing the sleepme_thermostat integration, I propose adding the following sensors to provide more detailed information and control within Home Assistant:
1. IP Ad…
-
### Steps to reproduce
1. Run app
2. Play with option to see colors in both material2/3 and with light/dark modes.
### Expected results
ElevatedButtons should be easily visible above Cards. …
-
edited:შექმენით abstract კლასი smartDevice და საშუალება მიეცით device-ს და მის
subclass-ებს დააიქსთენდონ ის(დაიმემკვიდრონ ის) კონკრეტულად ამ კლასშ შექმენით abstract მეთოდი performAction() და დააიმ…
-
In version 0.6.2.1 the following command would change brightness without turning on a dimmer (an HS220US in my case).
`kasa --host 192.168.xxx.xxx brightness 10`
I have not been able to achieve …
-
On devices with more than standard 8 bit brightness levels, the minimum is totally off.
This is because the computation is a direct scaling:
https://github.com/phhusson/platform_frameworks_base/bl…