-
https://www.raspberrypi.com/documentation/computers/configuration.html#device-trees-overlays-and-parameters
To reproduce:
1. Make a fresh install of Raspberry Pi OS Lite 64 bit
2. `sudo apt ins…
-
Would be awesome to be able to configure device overlays directly from this repo.
What is the best way to add some particular dts config? For example this one -
https://github.com/radxa/overlays/blo…
-
It could be nice to use overlays instead of creating a whole new dtb for the nunuchuk or for the serial.
Maybe one example could use a full dtb to show how to use the kernel build system and then ano…
-
### What happened?
Hi,
Failed to enable CAN1 with overlay:
`U_BOOT_FDT_OVERLAYS="device-tree/rockchip/overlay/rk3588-can1-m1.dtbo"`
U-boot successfully updated:
```
ubuntu@ubunturock5b:~$ cat …
-
Hello,
For some time, I have been trying to port the device tree overlay (DTO) file that is provided to the NVIDIA Jetson platform. Despite my best efforts, I have been unable get get any success s…
-
Hello
Upgrading to Kernel 4.1 i cannot get my UART cape to work.
I can't find any files in /lib/firmware like there used to be.
BB-UART1 and BB-UART2
I've tryed adding kernel-devicetree to my image,…
-
https://github.com/Xilinx/Vitis-Tutorials/tree/2022.2/Vitis_Platform_Creation/Design_Tutorials)/[01-Edge-KV260]/step2.md
xsct
createdts -hw ../kv260_hardware_platform/kv260_hardware_platform.xsa -…
-
### Describe the bug
This report is inspired by https://github.com/raspberrypi/linux/pull/6273 and the not so sympathetic reaction to it on the Linux kernel mailing list.
I attempted to accomplish…
-
### What happened?
Installed ubunt 24.04 version on rock-5b-plus. I have mounted the Radxa 25W POE HAT on it. The device gets power, boots up nicely, but the fan is never spinning up. Not even when f…
-
To learn more about overlays: https://www.kernel.org/doc/Documentation/devicetree/overlay-notes.txt
One possibility is adding an `--apply` argument to the existing `fdtdump` command:
```
fdtdum…