-
### Where do you suspect the issue?
Issue in DFU library, e.g. upload stops in the middle
### Version
2.5.0 (Latest)
### Describe the issue
When the Android screen is off, the DFU fails…
-
### Operating System
Linux
### INFO_UF2.TXT
I have no info_uf2.txt
### What happened ?
Installed all perquisites, tried to make the bootloader for one board, and it failed
Using Manjaro, latest …
-
### Verification
- [X] I searched for similar bug reports (including closed issues) and found none was relevant.
### What happened?
Firmware update failed with error message: "Disconnected from GAT…
-
**DFU Bootloader version (please complete the following information):**
- SDK version: 17.0.2
- Bonding used: no
- Library version: 4.10.4
**Device information (please complete the following …
-
The "Arduino_LED_Matrix" library's "TextWithArduinoGraphics" example has a dependency on the "ArduinoGraphics" library:
https://github.com/arduino/ArduinoCore-renesas/blob/4606b85cb13142eb30117368a…
-
With iPhone 15, When updating multiple BLE devices simultaneously, we have observed an intermittent `Error 8: Operation not permitted` issue.
The firmware update zip package has a size of around 360k…
-
### Operating System
Linux
### Arduino IDE version
Arduino IDE 2.3.2
### Board
ESP32S3 Dev Module
### ArduinoCore version
2.0.13
### TinyUSB Library version
Latest 3.1.4
### Sketch as ATTACH…
-
### DFU Bootloader version (please complete the following information):
- nRF5 SDK version: 8.1
- Are you using bonding: No
- DFU Library version: 2.3.0
### Device information (please complet…
-
### Where do you suspect the issue?
Issue related to Android version or specific device
### Version
2.4.0
### Describe the issue
I am using DFU Bootloader v8.1.0 for my application and …
-
Hi, could you please assist with the following issue or provide hints what to try next?
### Problem
Cannot extend SDR range with [official instructions from AD]( https://wiki.analog.com/university…