-
Hey,
I've been trying to get DFU mode (0x0106) VDM message to be sent to my Mac Mini, however I'm not able to send the same message 1-3 seconds after sending the first one.
Sending a DFU message 1-3 …
-
Following this page[ https://wiki.seeedstudio.com/XIAO-BLE-Sense-Bluetooth_Usage/#tech-support--product-discussion] which is titled "Bluetooth Usage (Seeed nRF52 Boards Library)"
Using Arduino IDE …
-
Hi,
This is likely operator error somewhere, but I'm hoping to document my troubleshooting in case it happens to anyone else.
I used the cargo installation method on Archlinux.
Device: [Bose …
-
Hey there,
the blue LED from the U2C V2.1 is always on, but the board is never in DFU mode. Tested with RPI and Windwos with "STM Cube Programmer".
Any ideas?
-
My phone it's the poco x6 pro, i was makinh the map of the pad for playing cod, i feel like delay or bit Strange, after that the gamesir app recomends me to update to the last firmware versión 144.13 …
-
### Where do you suspect the issue?
Issue related to Android version or specific device
### Version
2.4.0
### Describe the issue
I am using DFU Bootloader v8.1.0 for my application and …
-
### Device
iPhone 6s+
### Version
iOS 15.8.2
### Passcode?
- [ ] Passcode is enabled.
### Start going into detail..
I'm attempting to run palera1n on a Raspberry Pi 3 B+ running Raspberry Pi OS…
-
![1](https://github.com/user-attachments/assets/0f78c1b1-8ed0-433a-a7af-2919e83fac17)
| | |
|---|---|
|**librealsense**|2.55.1 RELEASE|
|**OS**|Windows|
|**Name**|Intel RealSense D435I|
|**Ser…
-
Hello,
I like your keybon very much, I made one too, but I don't know how to use tx/rx to burn my board,
For bl, I chose to use stlink, I flew dio and clk on the board, which allowed me to flash the…
-
When using the built in USB DFU bootloader, lets auto-reset into the bootloader mode from USB Serial using something like 1200-baud knocking