-
### The problem
After a few minutes after a hard reboot the DHT21 sensor gets inresponsive. But is working again after hard reset.
### Which version of ESPHome has the issue?
2024.10.3
### What …
-
Thank you for opening an issue on an Adafruit Arduino library repository. To
improve the speed of resolution please review the following guidelines and
common troubleshooting steps below before cre…
-
hello
getting the brand new fresh firmware 1.0.6 to finally use the long awaited i2c connector support.
But sadly, the temperature is not updating (you have to reboot the device to get only 1 new r…
-
How can i use DHT sensor whith ESP8266 and HomeKit?
-
Hi,
using Raspberry Pi Zero with DHT11 sensor and I am observing this issue:
**"A full buffer was not returned. Try again."** after running `dht_simpletest.py`.
I edited values to match DHT11 an…
fniko updated
3 weeks ago
-
### The problem
I upgraded ESPHome from 2024.2 to 2024.6 for a Pico W with the Sonoff SI7021 sensor. Measurement always fails after the upgrade; after a rollback to 2024.2, it works fine again.
It…
-
Hi. I am an astronomer/astrophotographer. I am currently building a control board for my Celestron telescope and one of the metrics I want to collect is the Dew Point. I will use this in deciding t…
-
I have an arduino nano v3 and a RFM69HW. Everything works fine, but when I set: `radio.setHighPower();` it gets blocked when I perform: `radio.send(TONODEID,sendbuffer,9);`.
The RFM69HW is fed usin…
-
### The problem
Hi ESPHome team,
I'm struggling to get the Sonoff Temp and Humidity Sensor THS01 (SI7021) working on the Sonoff TH Origin 16A (THR316D).
I used the yaml configuration of the So…
-
Would it be possible to use DHT 12 sensor with this module? (The board im using https://wiki.52pi.com/index.php?title=EP-0106)