-
I think the tolerance of DHT12 makes it totally useless. I have 5 pcs of DHT12, and tested with 3 of them. The temperature is around 2*C higher than DHT22.
And the humidity tolerance of DHT12 is ext…
-
Please add DHT12 support to this library. DHT12 uses I2C, not the 1 wire protocol. I would be happy to contribute to this repo but there are no contribution instructions. I will note that DHT12 is pre…
-
### The problem
So I bought a DHTC12 sensor from Aliexpress.
Dutch link to seller page:
https://nl.aliexpress.com/item/1005007198030360.html?spm=a2g0o.order_list.order_list_main.53.31d479d2F6q9Ak…
-
- Arduino board: Not relevant (based on visual inspection of code)
- Arduino IDE version (found in Arduino -> About Arduino menu): Also not relevant (based on visual inspection of code
- List …
-
**Describe the problem you have/What new integration you would like**
please consider adding support for DHT12 one wire connection
**Please describe your use case for this integration and al…
ryrzy updated
2 years ago
-
In the example "simple" the library is presenting this:
Arduino: 1.8.5 (Windows 10), Placa:"NodeMCU 1.0 (ESP-12E Module), 80 MHz, Flash, 4M (1M SPIFFS), v2 Lower Memory, Disabled, None, Only Sketch…
-
Hello,
Thank you for sharing this nice project, I search from some time a clock with Meteo posibilities and yours look very nice; what Arduino version software you use and Arduinojson version ?
`unf…
-
Please add this project to the m5stack registry https://github.com/s2node/m5stack-DHT12
-
Homie 2.0. Unsure all the other library versions, I use platform io on visual studio code.
Not specifically a homie issue, but I'm using homie and so hopefully there's an error routine someone c…
-
The DHT11 sensor does not give any values. In this project the DHT12 library is used, but that should not be a problem because it should be downwards compatible, right? What could be the problem?