-
Per mail ontvangen:
Ik had een aantal vragen over de cadstandaard en gebruik van symbolen, specifiek voor werktuigkundige installaties binnen gebouwen.
Ten eerste, geldt de NLCS ook voor werktu…
-
After printing an M10x1 thread with ThreadProfile Workbench, I couldn't use it because it was too narrow. I had to recut the thread with a tap because the thread was too narrow. So I compared this thr…
-
Hi,
Thank you for this tool.
I am building a tube structure and i was wondering if it would be possible to output the pipe outside diameter and the wall thickness?
-
Create a simulated wave front with 0 SA. Select the 16 diameters button. The very last value is too small. I suspect the code has a bug that causes it not to add that last diameter (or some diamete…
-
Docstring and parameters don't match
`class DrillFeature(Feature):
"""Parametric drill hole to be made on an element.
Parameters
----------
plane : :class:`compas.geometry.Plane`
…
-
## Context
I was working on [a project](https://github.com/lucasg52/gnathresh-solv/) that involved preforming deep searches for propagation thresholds in cells with randomly generated geometries (v…
-
### Open5GS Release, Revision, or Tag
v2.7.2
### Steps to reproduce
1. Send a `Create-Session-Request` via GTPv2 S2b interface to the SMF with the `Node-Identifier` IE that contains host and realm …
-
Please see Diameter range input text box. I can only type in:
0, nnn
when I try to filter to
200, nnn
I get a "cannot convert float to NaN to integer.
![image](https://github.com/user-attachmen…
-
` "ocp_diameter": "7,7,7,7,7,9,9,9,11,11,13,13,13,17",`
Can you tell how did you get the above ocp_diameter and how did you set the label_diameter to 9?
Also can you once tell the difference bet…
-
### System information
- **SolveSpace version:** The parameters branch
- **Operating system:** e.g. Fedora 40
### Expected behavior
When I select a circle and press "d" and type a number i…