-
### The problem
Hello,
We have BGP configured on an equipment but we are having an issue where libreNMS is not detecting BGP peering and states for firewalls, namely:
Hardware: Check Point 15400
O…
-
### The problem
I have add my Dell T330 iDrac to LibreNMS and saw that the state inputs are right but interpreted wrong.
Example: My disks give me back a 8 (Non Raid) but it shows OK under State
A…
-
### The problem
All of my Meraki AP show up correctly and are recognized by LibreNMS. SysDescr show this
.1.3.6.1.2.1.1.1.0 = STRING: Meraki MR76 Cloud Managed AP
However, the MR28 has a "wro…
-
## Expected Behavior
Brocade ICX IronWare VLAN and/or Addresses should appear within Netdisco GUI under said device.
## Current Behavior
Brocade ICX7150 Switch running Layer3 firmare does not d…
-
### The problem
Firewall is discovered as a generic device
### Output of ./validate.php
```txt
librenms@p-mon-lims01:~$ ./validate.php
===========================================
Component | Vers…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### What happened?
Hi All,
Not sure if this is me or my setup but Im pretty sure I've setup everything …
-
### The problem
When opening [librenmshost/routing/protocol=bgp/](), all my BGP sessions, only show the `Local address` and no `Peer address`
All tough the information can been seen when click…
-
### The problem
I have two stacks of S4048T-ON having two different issues
1 Stack of S4048T is running Dell Networking OS 9.13(0.1), the other 9.14(1.7).
1.- Incomplete VLAN list shown in Li…
-
### The problem
Hello,
LibreNMS shows 21 year uptime for ZTE C300/C320 OLT.
Could you check it and correct SNMP query?
Also i can see generic logo, not ZTE.
OLT uptime:
```
OLT#sh system-gr
…
-
### The problem
Currently the OneAccess device ONE540X will not be added to the Devices, that will be backupped with Oxidized.
All other devices will.
Oxidized supports OneAccess devices: https:…