-
Hello Christophe. I get error: bad argument type
E. 54937758936840882/5hJ on first level of stack.
it is very hard to come out of the error into system menu but I was able to and reset DM42 to ori…
-
Reported [on MoHPC](https://www.hpmuseum.org/forum/thread-20157-post-188865.html#pid188865):
> Concerning, the state saving function, I observed that I am not able to save the calculator state under …
-
I'm preparing to write a small prolog interpreter for the DM42 calculator from SwissMicros. I'd very much like to use this project, but you don't have any license information provided, which means it'…
-
Sometimes, after starting the solver, tapping a number button to enter a value does not seem to register the release event and keeps repeating the number (as if you kept the button pressed).
I'm no…
-
Version: 0.6.0 on DM42
Steps to reproduce: (there are several ways; issue is that 'M' variable gets used in the units conversion, when unit contains meters)
Store 200 in variable named 'M'
Pu…
-
### Discussed in https://github.com/c3d/DB48X-on-DM42/discussions/175
Originally posted by **camillew** July 23, 2023
Hello,
While trying to write some simple program, I encountered an issu…
c3d updated
11 months ago
-
### Discussed in https://github.com/c3d/DB48X-on-DM42/discussions/174
Originally posted by **camillew** July 23, 2023
Hello,
I was trying to use complex numbers, and noticed that the ARG func…
c3d updated
11 months ago
-
In the help file, the font used to render code is a little bit too big.
c3d updated
11 months ago
-
I appreciate any support. I'm trying to compile the simulator on Arch Linux.
I installed: arm-none-eabi-binutils arm-none-eabi-gcc arm-linux-gnueabihf-gcc arm-linux-gnueabi-gcc
I did: git clone …
-
Just like the calculation app, we need the ability to scroll large results that do not fit in one screen's width, otherwise they are cropped.