-
## SOLVED
I try send a dmx data from opencv frame to Arduino esp32, but error can you help me ..?
import cv2
import sacn
GRID_WIDTH = 64
GRID_HEIGHT = 64
num_pixels = GRID_WIDTH * GRID…
-
When I try to upload outputs to my ForkinEye ESPixelStick V3 with it configured for DMX, the upload outputs fails.
When doing the same for Pixels on the stick, upload outputs works as expected.
When…
-
I have started programming microcontrollers after 25 years not having worked with C. So forgive me I am a bit rusty... I would like to make a channel converter. Simple and cheap DMX controllers w…
-
Hi,
I have problems when raising the `numChannels` variable from [Examples 1 and 2](https://github.com/sparkfun/SparkFunDMX/tree/master/examples) to values larger than `240`.
Within the example …
-
When testing example 2 with my lighting controller (in my case QuickDMX) I noticed that all of the 512 dmx channels need to have set a value on my dmx output device (D512) instead of being blank (No D…
-
In the DMX Channel GUI there where shown only 128 Channels.
-
Could be awsone if there is a way to get access to control DMX channels via MQTT
-
Hi Jostein,
I've been using your library on a small project that I am working on. I works great when the starting channel is 1!
However, I don't seem to be able to move the Start_channel. For insta…
-
This is used by DJs to control lighting.
-
Since complex fixtures are not yet available for visualization, only moving-head fixtures are patchable. Such complex fixtures should be made patchable and setup with a placeholder 3D model signifying…