-
### Enhancement summary
We are implementing dot1x and some missing variables. We need to generate the following config
```
router bgp 65111
vlan-aware-bundle PROD-VRF
redistribute do…
-
When dot1x is "turned on", MACs go from being DYNAMIC learned to STATIC via dot1x learned.
Without the "redistribution dot1x" under the mac-vrf, these MACs don't get shared with remote VTEPs.
The…
-
**Is your feature request related to a problem? Please describe.**
I have SSIDs that look something along the lines of "Rany PSK", "Rany dot1X", etc. The issue is that WiFi Analyzer filters it one wo…
rany2 updated
3 weeks ago
-
# Which Syntax?:
Highlighting of relevant Dot1x commands
# Expected behavior and actual behavior:
Would find it very beneficial if Dot1x commands at both global config and swithport config leve…
-
Hello ,
We are facing the following situation:
I have an Aruba 2930F switch where I can successfully authenticate users, printers, and other devices.
I want to enable 802.1X on a switchpo…
-
Occasionally the ChewieTestCase.test_logoff_dot1x unit test fails for this reason:
```
_______________________ ChewieTestCase.test_logoff_dot1x _______________________
self =
@patch('ch…
-
Hi,
I'm trying to do a port configuration with the module arubaoss_dot1x but get the error message `"unable to load response from device"`.
Playbook
```
---
- hosts: all
name: AAA Configur…
ad-ko updated
2 years ago
-
**Describe the bug**
Switch Template ACL "Mikrotik-Switching-Filter" does not work with newest RouterOS >7.15.
On RouterOS
-
### Enhancement summary
We are trying to adopt arista AVD version v5.0.0, and finding below validation errors.
```
ERROR! [MBH-CAMP0S]: 'Validation Error: servers': Invalid type 'dict'. Expected …
-
Hi team,
This cisco's log should match rule 4715.
>Apr 30 15:10:58: %DOT1X-5-FAIL: Authentication failed for client (Unknown MAC) on Interface Fa0/3 AuditSessionID`
```
**Phase 1: Completed pre…