-
Your library is fantastic. Thank you for making it public!
Any chance of extending coverage to other chipsets, APA102 in particular?
-
I'm excited about building this project, but I happen to have a 1 meter strip of 144/m APA102 LEDs, not Neopixels. Is there a modification I can make to the code that will let me run this type of addr…
-
In order to add these LEDs changes need to be made to the circuit board. Place all changes that need to be made and suggestions here.
hsean updated
8 years ago
-
How is the server run for DotStar or APA102C leds? I have both adafruit's DotStar and tinue APA102 libraries installed.
When running the server with $ sudo python3 server.py -D DotStar
I get:
se…
-
I've been using this library on many projects over the last couple of years, and love its simplicity, flexibility, and lack of dependencies. But now I've been tasked with upgrading a design which uses…
-
Hi I am trying to build a POV with dot star strip that is made of SK9822on esp8266 platform. With default settings (80 mhz) for a strip of 72 leds FastLED.show takes around 2000 us. Is this normal? St…
-
Hello,
I have been trying to use this library for the newly Arduino Nano Every, which has an ATMEGA4809 chip.
The new megaAVR-0 series have different registers than the "classic" AVRs found on the…
-
https://github.com/adafruit/Adafruit_CircuitPython_DotStar/blob/main/examples/dotstar_image_pov.py
is this example meant for linux?
i thought its a normal *uC* example..
it uses `from PIL impor…
-
Hi,
I am just thinking that the Erlang binary syntax could be handy and save you from some bsl/bor instructions in dotstar.erl:
```
write_dot(Red, Green, Blue, Illumination) ->
%% fast and dir…
-
They seem to work very similar to the NeoPixels, but are controlled through SPI instead of I2C.
So I assume it's a bit of work to support them with node-pixel?