-
having a hard time finding the respeaker 2 mic hat. purchased similar item from adafuit voice bonnet wm8960. works with your install but no LEDs. their demo uses Dotstars using gpio 5 data and 6 clock…
-
I've been using this library on many projects over the last couple of years, and love its simplicity, flexibility, and lack of dependencies. But now I've been tasked with upgrading a design which uses…
-
How is the server run for DotStar or APA102C leds? I have both adafruit's DotStar and tinue APA102 libraries installed.
When running the server with $ sudo python3 server.py -D DotStar
I get:
se…
-
Hi there, currently using your led-effects plugin with great success for two sets of dotstar runs. I asked this over at led-control with no answer, but wanted to see if you had any insight by chance.…
-
I am trying to get FastLED working with Adafruit's ItsyBitsy nRF52840 Express. I know support is considered experimental but so far, it is not working at all :(
Here are details:
- FastLED vers…
-
**Describe the bug**
As soon as any code is written for the Gemma M0 which uses the light blocks to set RGB LEDs then an external 4 wire DotStar LED strip will be added in the simulator and wired up …
-
Over the past few years, I've learned that new users have a hard time finding device libraries so they sometimes re-implement support for a device (or give up). Good libraries also go unused due to na…
-
Hello. Can you add this item to the Fritzing library, please?
https://www.adafruit.com/product/2240
-
```c++
/*
This is a basic example on how to use Espalexa with FastLED LED Strip
- first start: LED orange indicates: connect to me ;)
- LED switches to green if youre connected and config…
-
Hi
I have trying to run APA102 on my ItsyBitsy nRF52840 Express board and custom nRF52840 BBoard but no success
I have 104 LEDs (4x26) and trying to get it working but code continue after 52 eve…