-
Hi all!
If LED blinks when led controller is starting (timer in /sys/class/led/.../trigger), its' state is not set correctly in D-Bus.
This leads to inability to switch it off directly without pri…
-
Since LampTest is a diagnostic tool, we should not report PropertyChanged signal , which would be confused for a real failure.
So the solution is to use the "skipSignal" feature that is in the inte…
-
```
Problem:
If you read in a snapshot, some configuration parameters might have changed
(PAL to NTSC for example, disc drive LED)
The does not notice this change.
Idee:
Implement "tellMeYourCon…
-
```
Problem:
If you read in a snapshot, some configuration parameters might have changed
(PAL to NTSC for example, disc drive LED)
The does not notice this change.
Idee:
Implement "tellMeYourCon…
-
Moved from #149. Cleaned up a bit.
You've seen the matrices for my games; systems discrete to a fault, and everything done inside the ECS. Right now there's a bit of a functionality gap between the s…