-
Hi,
I ran multiple receivers total 4 in 4 threads, with gmskframesyn_execute to demodulate and decode data but no luck. If I ran one thread then results are ok.
Even without a thread if downconvert…
-
Any chance someone with PCB engineering skills, time + interest to re-design a new replacement PCB (for the Google Nest Mini and Google Home Mini speaker series) that also includes an xCORE xCORE DSP …
Hedda updated
2 months ago
-
Whiting et al. proposes that real time clock synchronization among ADCs in a distributed network can be achieved on the software level without a dedicated hardware solution such as GPS-disciplined osc…
-
The ability to set up multiple demodulators simultaneously might be somewhat useful, for example, when one wants to listen to several air traffic channels at once.
-
Verstärker im Hauptraum [Pioneer VSX-921](https://wiki.muc.ccc.de/av:start#pioneer_vsx-921) (-K) zeigt Fehlermeldung UE22
> **Fehler UE22:**
>
> Ursache ist eine fehlerhafter Texas Instrumemts C…
-
**Describe the bug**
A clear and concise description of what the bug is. Stereo Diversity (SD button) does not work. No sync of band and mode and fx, and no separate audio streams to stereo headphon…
hp3ak updated
4 months ago
-
**Copied over from ApacheLabs forums. Add anything new as a comment below. Cheers. Richie.**
On the TODO list (in no specific order)
1) pan adaptor blobs become markers, and have management faci…
-
If the software could set all 6 modules, to the same Rx frequency and select the strongest output, via a video switch f.i. 2x CD4066, the unit could be also used as a long range multi diversity basest…
-
Hi Dennis,
FMw is limited to minimum bandwith of 100khz. In some situations (noisy signal in near of) it would helpful to use a lower bandwith. Can you change it to 50khz?
Also i suggest to change m…
-
I'm getting an error that is preventing an older (pre-MusicCast) device from being added, i.e.
_1/13/2021, 10:38:28 AM Unhandled rejection TypeError: Cannot read property '0' of undefined_
My con…