-
#### Description
According to the description excerpted from the MCLAG HLD, ICCPd must use ebtables rules to isolate the peer link port and the MCLAG port channel, preventing trapped BUM pack…
puffc updated
2 months ago
-
Hi,
New issue spotted ! 😛
From the container, trying to add an access port with this command:
```
root@leaf-1:/# nv set interface swp1 bridge domain br_default access 165
root@leaf-1:/# nv co…
-
**What happened**: I exec 'firewall-cmd --direct --add-chain eb nat TEST' to add a chain in ebtables, but when I exec 'firewall-cmd --direct --remove-chain eb nat TEST', I can not remove the chain and…
-
This issue tries to untangle the mechanisms that exist in Gluon to make a reliable setup easier.
[Gluon Config Docs](https://gluon.readthedocs.io/en/latest/user/site.html#configuration)
### loca…
-
### Describe the bug
When enabling client isolation in the WiFi settings this does not work for WDS clients (as those create separate bridge ports).
It would be nice if enabling client isolation on …
-
# Issue Report #
## Bug ##
### CoreOS Version ###
```
NAME=CoreOS
ID=coreos
VERSION=1185.5.0
VERSION_ID=1185.5.0
BUILD_ID=2016-12-07-0937
PRETTY_NAME="CoreOS 1185.5.0 (MoreOS)"
ANSI_CO…
-
So basically I wanna use winapps, and when I go to create a virtual machine, everything goes to plan. But when im on the last screen it says that the network is inactive, when I try to start it, it gi…
-
Hi, i was trying to setup firewalld on a raspberrypi running raspbian, and after i try to reload it, it gives the following error:
`sudo firewall-cmd --reload
Error: COMMAND_FAILED: '/usr/sbin/ebt…
-
Hello ,
i am wondering if this has anything to do with mt7530 dma or some sort of hardware offloading in place.
i tried with openwrt 21.02 as well as 22.03 got the same outcome
because cpu wont se…
-
```
Hi everyone!
My lan network is 192.168.10.x/24
1. Create a guest network access in "ACCESS-POINT mode", in this mode, guest
have access to my private network and not only web access
2. In "RO…