-
With later firmware versions (>2017) of the infini-/mpp-solar 10+15kw inverters, full bms support was implemented.
Only supported BMS I'm aware of is pylontech via RS485 bus. You need a extra modbus-…
-
bms is similar to SuperVoltBt,
same UUID_RX = '6e400003-b5a3-f393-e0a9-e50e24dcca9e'
UUID_TX = '6e400002-b5a3-f393-e0a9-e50e24dcca9e'
different commands
packet structure
[0…
-
Hello Anton (or anybody else willing to help),
I have a problem, probably not direct related to dbus-aggregate-batteries, but I hope to get some help.
I have a similar hardware setup as you: 3x Mu…
-
Hello, thanks for your great work, unfortunately I cannot get to to work with my unit SP04S034L4S200A.
I have included the log and the home assistant ESPHome configuration and hope to get some poi…
-
Pi 4 connected via Ethernet and BT to the JK BMS (inside an EEL Case)
Pi 4 sits on top of the case about 10 or 15 cm away from the BMS inside the metal box
HA OS latest June release "2024.6.4"
Mosq…
-
I have had Batmon working intermittently working for a couple of days now however it stops working and I am not sure why. I've restarted several times, tried different settings for keep_alive and bt_p…
-
Using JK BMS with MQTT and bluetooth.
It was working fine, no issues, but in the last few weeks I cannot get the all the info. I'm missing SOC and Temps. Tried to restore backups in HA but still the…
-
Batmon version: 1.78
Accu bank 1
JK:BMS: JK_B2A20S20P
Firmware: 11.25
Hardware: 11.X
Accu bank 2
JK BMS: JK_B2A20S20P
Firmware: 11.261
Hardware: 11.XW
Since a couple of weeks I'm miss…
-
Bluetooth and MQTT are working correctly. But batmon stopped after some minutes and I can not see any entities.
---
```
s6-rc: info: service fix-attrs successfully started
s6-rc: info: service leg…
-
I've given the 4 cell version a try, and I'm not getting all the data coming through. Seems I'm just missing the temperature sensor data, and all the c** values are zero.
Happy to provide as much d…