-
I am getting the following in the terminal when attempting to flash a P8X32A-D40.
```
proploader.mac -k -D baud-rate=115200 -p /dev/cu.usbserial-P97z9aa5 "~/pixelmusic3000e.binary" -e
Opening fil…
k6lcm updated
2 weeks ago
-
Add support for EEPROM saving/loading
agg23 updated
3 weeks ago
-
### Board
ESP32 Dev Module
### Device Description
ESP32 Dev Kit C
### Hardware Configuration
Nothing is connected, just the bare board
### Version
v3.0.0
### IDE Name
Platform IO
### Operati…
-
I opened the project in the latest Arduino IDE and I'm getting these errors:
/Users/$USERNAME/Downloads/BLE-Scanner-main/BLE-Scanner/eeprom.cpp: In function 'void EepromInit(int)':
/Users/$USER…
-
Hi Andrew
Thanks for writing pi-eeprom-programmer, it sounds like it should be very useful, if I understood how to wire it up!
There are two problems with the README, the first is minor and easi…
-
Given the issues described in #129, it is looking like the M24C16 EEPROMs will have little space for user code, making it difficult for developers to write feature-rich firmware for existing hexpansio…
-
Hello
I played with uploading my firmware and cleared all the memory and now when I load the Ultra or normal firmware nothing happens.
Do I need a bootloader or something similar?
-
Hi,
I want to build my own USBKVM. The BOM isn't clear on how big the 24Cxx EEPROM is supposed to be as the metadata in the Horizon project just says "24Cxx SOIC8" and not an exact part number. The…
-
Currently, the `ec_open` call looks like this
```c
int ec_open(ec_t *pec, const osal_char_t *ifname, int prio, int cpumask, int eeprom_log)
```
Having something like the following would enable the…
-
Hi there :)
Would it be possible to get a list of supported EEPROMs for replacing unflashable ROMs/chips ?
I gather from the issues and release notes that right now, at least the following are s…