-
Bei einem EMH eHZ-H wird beim Momentan Wert kein Unterschied gemacht ob Importiert oder Exportiert wird da der Zähler das Vorzeichen nicht ändert.
Ich kann leider nicht die Binären Daten sehen aber …
-
When I select ```delayedstalta´´´ (I also adjusted the remaining triggering settings), I get the following error:
```
Using config file: settings_saojorge2023.cfg
Opening hdf5 table: SaoJorge_202…
-
Hallo,
ich lese mit vzlogger die beiden Zählwerke 1.8.0 und 2.8.0 problemlos von meinem Zähler (EHZ-HW8) aus.
Leider wird die aktuelle Wirkleistung (15.7.0) immer positiv angegeben.
Ich hätte er…
ednax updated
3 years ago
-
smeterd read-meter -vvv --serial-port /dev/ttyUSB0 --baudrate 9600 --serial-baudrate 9600 --serial-bytesize 8 --serial-parity N --serial-stopbits 1
[2020-01-04 11:27:59,029] DEBUG Open serial connec…
-
* Subject: USB Optolink + Raspi: Fehler beim Booten
* Wiki-Page: home
* From: Gerdi2
* Date: Wed, 2 Oct 2013 23:10:44 UT
* Message-ID:
Hallo,
habe ein Raspi Model B mit dem USB Adpater lt. Bauanle…
-
Program: SonLVL
Build Date: 03/22/2023 18:17:11
OS Version: Microsoft Windows NT 6.2.9200.0
Log:
Operating system: Microsoft Windows NT 6.2.9200.0
Opening INI file "C:\Users\rylan\OneDrive\Deskto…
-
I have built a homeassistant glow hardware setup and found out that it is actually not working for smartmeters. :-(
https://github.com/klaasnicolaas/home-assistant-glow
Would it be possible to con…
-
I encountered a few missing and/or inconsistent metadata information while measuring seismic waveform amplitudes with scamp (sc3) for a subset of earthquakes in the pre-seiscomp period. It seems that …
-
code line 200:
sml167 = parseSML(data_hex, "167", '070100100700ff', 28, 8)
does not seem to find any data, probably because '070100100700ff' cannot be found in the data stream.
Got a new met…
-
Hello,
A colleague and I have noticed that using the move_std method on a large float 32 array can return some strange results, mainly zeros when the std of the window is not 0. Moreover, if the m…