-
I would like to get an idea of what's needed to implement a RGB interface for the LCD_CAM module, i was told by @Dominaezzz that the DMA api's aren't currently powerful enough to support RGB mode. For…
-
-
Hi @coseyfannitutti I'm writing to you because, as per subject I'd like to build the Discipline v2 by myself but by being completely new to the hobby, I'm not quite sure where to go to get the parts m…
-
Hi, Is this screen supported on subj?
```
ubuntu@ubuntu:~$ git clone https://github.com/Elecrow-keen/Elecrow-LCD35.git
Cloning into 'Elecrow-LCD35'...
remote: Enumerating objects: 11, done.
remot…
-
Hello,
I am facing the following building error with [FullyFeatured-ESP32.ino](https://github.com/marvinroger/async-mqtt-client/blob/develop/examples/FullyFeatured-ESP32/FullyFeatured-ESP32.ino). I t…
lboue updated
3 months ago
-
I installed it correctly, then i switched back to hdmi with
`cd Elecrow-LCD35
sudo ./Elecrow-LCD35 hdmi`
Now I want to switch back to the LCD-Touchscreen.
I tryed:
`cd Elecrow-LCD35
sudo ./Elec…
-
I have an Elecrow 5" TFT Raspberry Pi Display (https://www.amazon.com/gp/product/B013JECYF2/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1) And a Raspberry Pi 3 B+. I take the firmware off of githu…
-
Hello,
I am successfully using this firmware with [LR1302 from Elecrow](https://www.elecrow.com/lr1302-lorawan-gateway-module-spi-eu868-sx1302-long-range-gateway-module-support-8-channels.html) and…
-
I had do downgrade the GFX Library for Anruino to 1.3.0 to get the example to work.
https://forum.elecrow.com/discussion/562/what-is-the-meaning-of-this-error
Please make the sample code compati…
-
When I try to perform an action (formerly known as services), I get an unhandled execution. Any ideas? The information is displayed correctly and pressing the buttons provided by the integration does …